Principles for seismic strengthening by CFRP

Because the building itself is seriously damaged, we must ensure that the structure of the building is not damaged two times during construction. So at present, CFRP reinforcement is a kind of reinforcement method that minimizes the loss of buildings. It is recommended to be widely promoted in the earthquake stricken area.

Principles for seismic strengthening by CFRP sheet


Principles for seismic strengthening by CFRP sheet

The following principles must be observed when using CFRP sheet to reinforce buildings.


  • Because the building itself is seriously damaged, we must ensure that the structure of the building is not damaged two times during construction. So at present, CFRP reinforcement is a kind of reinforcement method that minimizes the loss of buildings. It is recommended to be widely promoted in the earthquake stricken area.


  • After carrying out the aseismic appraisal of buildings, it is necessary to determine the methods of reinforcement for buildings and not to directly construct them based on experience. After all, this is a matter of life.


  • The load transfer must be reasonable, so as to keep the reasonable transmission way of the original structure as far as possible, eliminate or reduce the defect of the original structure transmission way.

Horse Construction Önerilen Ürünler

Burada ihtiyacınız olan her şeyi bulabilirsiniz. Bu ürünleri denemeye güvenin, sonra büyük bir fark göreceksiniz.

HM-20 Karbon Elyaf Kumaş

Horse Construction'ın karbon fiberi, binalar, köprüler, otoyollar, demiryolları, tüneller, iskeleler ve sivil havaalanlarındaki beton, duvarcılık, çelik ve ahşap alt tabakaların yapısal güçlendirilmesi, onarımı ve yenilenmesi içindir.

Daha Fazla >

HM-180 Karbon Fiber Astar

HM-180 karbon fiber astarı düşük viskoziteli, güçlü penetrasyon yeteneğine sahip yapıştırıcıdır, takviyeli elemanların yüzeyinin alt tabakasının bulaşması için kullanılır, rolü kesilerek çıkarıldıktan sonra kırık betona takviyeyi bağlamaktır; elemanların y

Daha Fazla >

HM-180C3P Karbon Fiber Yapıştırıcı

Düşük viskoziteli, iyi emdirme, belirli tiksotropik özelliğe sahip, takviyeli bileşen yüzeyi ve elyaf ürünlerinin emdirilmesi ve yapıştırılması için kullanılır. Horse karbon fiber yapıştırıcısının görevi, elyaf ürünlerine tamamen batırılması ve elyaf ürünl

Daha Fazla >

Back
Top
Close