Çözümler
Horse Construction, teknik destekler, dokümantasyon destekleri, ürün destekleri, yazılım destekleri, proje destekleri ile tam bir yapısal güçlendirme malzemesi yelpazesi sunar.
The building should be reinforced and retrofitting into industrial factory building of the first and thecond level, and third to five floors for the office building.A large amount of reinforcement and repair construction of the foundation, column, beam, plate and other components which are not satisfied with the requirements of standard and safe are carried out.
Project overview
Dongguan Houjie building reinforcement project for the reinforced concrete frame structure five on the ground floor, the building covers an area of 1680 square meters, total construction area of 8453 square meters, the height is of 19.5m.
The building should be reinforced and retrofitting into industrial factory building of the first and thecond level, and third to five floors for the office building.A large amount of reinforcement and repair construction of the foundation, column, beam, plate and other components which are not satisfied with the requirements of standard and safe are carried out.
Main strengthening methods
Anchor static pressure pile, stick steel plate, enlarging section and crack injection repair
Structural Strengthening matrials
HM-120 steel plate bonding adhesive
HM-500 anchoring adhesive
HM-120L crack injection adhesive
(strengthening with anchoring adhesive)
(enlarging section)
Burada ihtiyacınız olan her şeyi bulabilirsiniz. Bu ürünleri denemeye güvenin, sonra büyük bir fark göreceksiniz.
HM-120 yapısal çelik levha bağlayıcı yapıştırıcı, güçlü yapışma özelliğine sahip, oda sıcaklığında kürlenen iki bileşenli epoksi bir üründür. Çelik ve betonun kendi kendine yapışmasında ve karşılıklı yapışmasında mükemmel yaşlanma karşıtı, şok direnci özel
Horse HM-120L beton çatlak enjeksiyon yapıştırıcısı, enjekte edilerek beton çatlaklarını onarmak için kullanılan bir epoksidir. Epoksi, yüksek nüfuz etme özelliğine sahiptir. Yapısal betondaki çatlakların düşük basınçta enjeksiyonu.